#include "fuse_opt.h"
#include "fuse_log.h"
#include <stdint.h>
#include <sys/types.h>

Data Structures
struct	fuse_file_info

struct	fuse_loop_config

struct	fuse_conn_info

struct	fuse_buf

struct	fuse_bufvec

Macros
#define	FUSE_MAJOR_VERSION 3

#define	FUSE_MINOR_VERSION 11

#define	FUSE_CAP_ASYNC_READ (1 << 0)

#define	FUSE_CAP_POSIX_LOCKS (1 << 1)

#define	FUSE_CAP_ATOMIC_O_TRUNC (1 << 3)

#define	FUSE_CAP_EXPORT_SUPPORT (1 << 4)

#define	FUSE_CAP_DONT_MASK (1 << 6)

#define	FUSE_CAP_SPLICE_WRITE (1 << 7)

#define	FUSE_CAP_SPLICE_MOVE (1 << 8)

#define	FUSE_CAP_SPLICE_READ (1 << 9)

#define	FUSE_CAP_FLOCK_LOCKS (1 << 10)

#define	FUSE_CAP_IOCTL_DIR (1 << 11)

#define	FUSE_CAP_AUTO_INVAL_DATA (1 << 12)

#define	FUSE_CAP_READDIRPLUS (1 << 13)

#define	FUSE_CAP_READDIRPLUS_AUTO (1 << 14)

#define	FUSE_CAP_ASYNC_DIO (1 << 15)

#define	FUSE_CAP_WRITEBACK_CACHE (1 << 16)

#define	FUSE_CAP_NO_OPEN_SUPPORT (1 << 17)

#define	FUSE_CAP_PARALLEL_DIROPS (1 << 18)

#define	FUSE_CAP_POSIX_ACL (1 << 19)

#define	FUSE_CAP_HANDLE_KILLPRIV (1 << 20)

#define	FUSE_CAP_CACHE_SYMLINKS (1 << 23)

#define	FUSE_CAP_NO_OPENDIR_SUPPORT (1 << 24)

#define	FUSE_CAP_EXPLICIT_INVAL_DATA (1 << 25)

#define	FUSE_IOCTL_COMPAT (1 << 0)

Enumerations
enum	fuse_buf_flags { FUSE_BUF_IS_FD = (1 << 1) , FUSE_BUF_FD_SEEK = (1 << 2) , FUSE_BUF_FD_RETRY = (1 << 3) , FUSE_BUF_IS_FD = (1 << 1) , FUSE_BUF_FD_SEEK = (1 << 2) , FUSE_BUF_FD_RETRY = (1 << 3) , FUSE_BUF_IS_FD = (1 << 1) , FUSE_BUF_FD_SEEK = (1 << 2) , FUSE_BUF_FD_RETRY = (1 << 3) , FUSE_BUF_IS_FD = (1 << 1) , FUSE_BUF_FD_SEEK = (1 << 2) , FUSE_BUF_FD_RETRY = (1 << 3) }

enum	fuse_buf_copy_flags { FUSE_BUF_NO_SPLICE = (1 << 1) , FUSE_BUF_FORCE_SPLICE = (1 << 2) , FUSE_BUF_SPLICE_MOVE = (1 << 3) , FUSE_BUF_SPLICE_NONBLOCK = (1 << 4) , FUSE_BUF_NO_SPLICE = (1 << 1) , FUSE_BUF_FORCE_SPLICE = (1 << 2) , FUSE_BUF_SPLICE_MOVE = (1 << 3) , FUSE_BUF_SPLICE_NONBLOCK = (1 << 4) , FUSE_BUF_NO_SPLICE = (1 << 1) , FUSE_BUF_FORCE_SPLICE = (1 << 2) , FUSE_BUF_SPLICE_MOVE = (1 << 3) , FUSE_BUF_SPLICE_NONBLOCK = (1 << 4) , FUSE_BUF_NO_SPLICE = (1 << 1) , FUSE_BUF_FORCE_SPLICE = (1 << 2) , FUSE_BUF_SPLICE_MOVE = (1 << 3) , FUSE_BUF_SPLICE_NONBLOCK = (1 << 4) }

Functions
struct fuse_conn_info_opts *	fuse_parse_conn_info_opts (struct fuse_args *args)

void	fuse_apply_conn_info_opts (struct fuse_conn_info_opts opts, struct fuse_conn_info conn)

int	fuse_daemonize (int foreground)

int	fuse_version (void)

const char *	fuse_pkgversion (void)

void	fuse_pollhandle_destroy (struct fuse_pollhandle *ph)

size_t	fuse_buf_size (const struct fuse_bufvec *bufv)

ssize_t	fuse_buf_copy (struct fuse_bufvec dst, struct fuse_bufvec src, enum fuse_buf_copy_flags flags)

int	fuse_set_signal_handlers (struct fuse_session *se)

void	fuse_remove_signal_handlers (struct fuse_session *se)

Macro Definition Documentation

◆ FUSE_CAP_ASYNC_DIO

#define FUSE_CAP_ASYNC_DIO (1 << 15)

Indicates that the filesystem supports asynchronous direct I/O submission.

If this capability is not requested/available, the kernel will ensure that there is at most one pending read and one pending write request per direct I/O file-handle at any time.

This feature is enabled by default when supported by the kernel.

Definition at line 291 of file fuse_common.h.

◆ FUSE_CAP_ASYNC_READ

#define FUSE_CAP_ASYNC_READ (1 << 0)

Indicates that the filesystem supports asynchronous read requests.

If this capability is not requested/available, the kernel will ensure that there is at most one pending read request per file-handle at any time, and will attempt to order read requests by increasing offset.

This feature is enabled by default when supported by the kernel.

Definition at line 145 of file fuse_common.h.

◆ FUSE_CAP_ATOMIC_O_TRUNC

#define FUSE_CAP_ATOMIC_O_TRUNC (1 << 3)

Indicates that the filesystem supports the O_TRUNC open flag. If disabled, and an application specifies O_TRUNC, fuse first calls truncate() and then open() with O_TRUNC filtered out.

This feature is enabled by default when supported by the kernel.

Definition at line 162 of file fuse_common.h.

◆ FUSE_CAP_AUTO_INVAL_DATA

#define FUSE_CAP_AUTO_INVAL_DATA (1 << 12)

Traditionally, while a file is open the FUSE kernel module only asks the filesystem for an update of the file's attributes when a client attempts to read beyond EOF. This is unsuitable for e.g. network filesystems, where the file contents may change without the kernel knowing about it.

If this flag is set, FUSE will check the validity of the attributes on every read. If the attributes are no longer valid (i.e., if the attr_timeout passed to fuse_reply_attr() or set in struct fuse_entry_param has passed), it will first issue a getattr request. If the new mtime differs from the previous value, any cached file contents will be invalidated as well.

This flag should always be set when available. If all file changes go through the kernel, attr_timeout should be set to a very large number to avoid unnecessary getattr() calls.

This feature is enabled by default when supported by the kernel.

Definition at line 244 of file fuse_common.h.

◆ FUSE_CAP_CACHE_SYMLINKS

#define FUSE_CAP_CACHE_SYMLINKS (1 << 23)

Indicates that the kernel supports caching symlinks in its page cache.

When this feature is enabled, symlink targets are saved in the page cache. You can invalidate a cached link by calling: fuse_lowlevel_notify_inval_inode(se, ino, 0, 0);

This feature is disabled by default. If the kernel supports it (>= 4.20), you can enable this feature by setting this flag in the want field of the fuse_conn_info structure.

Definition at line 364 of file fuse_common.h.

◆ FUSE_CAP_DONT_MASK

#define FUSE_CAP_DONT_MASK (1 << 6)

Indicates that the kernel should not apply the umask to the file mode on create operations.

This feature is disabled by default.

Definition at line 177 of file fuse_common.h.

◆ FUSE_CAP_EXPLICIT_INVAL_DATA

#define FUSE_CAP_EXPLICIT_INVAL_DATA (1 << 25)

Indicates support for invalidating cached pages only on explicit request.

If this flag is set in the capable field of the fuse_conn_info structure, then the FUSE kernel module supports invalidating cached pages only on explicit request by the filesystem through fuse_lowlevel_notify_inval_inode() or fuse_invalidate_path().

By setting this flag in the want field of the fuse_conn_info structure, the filesystem is responsible for invalidating cached pages through explicit requests to the kernel.

Note that setting this flag does not prevent the cached pages from being flushed by OS itself and/or through user actions.

Note that if both FUSE_CAP_EXPLICIT_INVAL_DATA and FUSE_CAP_AUTO_INVAL_DATA are set in the capable field of the fuse_conn_info structure then FUSE_CAP_AUTO_INVAL_DATA takes precedence.

This feature is disabled by default.

Definition at line 399 of file fuse_common.h.

◆ FUSE_CAP_EXPORT_SUPPORT

#define FUSE_CAP_EXPORT_SUPPORT (1 << 4)

Indicates that the filesystem supports lookups of "." and "..".

This feature is disabled by default.

Definition at line 169 of file fuse_common.h.

◆ FUSE_CAP_FLOCK_LOCKS

#define FUSE_CAP_FLOCK_LOCKS (1 << 10)

If set, the calls to flock(2) will be emulated using POSIX locks and must then be handled by the filesystem's setlock() handler.

If not set, flock(2) calls will be handled by the FUSE kernel module internally (so any access that does not go through the kernel cannot be taken into account).

This feature is enabled by default when supported by the kernel and if the filesystem implements a flock() handler.

Definition at line 215 of file fuse_common.h.

◆ FUSE_CAP_HANDLE_KILLPRIV

#define FUSE_CAP_HANDLE_KILLPRIV (1 << 20)

Indicates that the filesystem is responsible for unsetting setuid and setgid bits when a file is written, truncated, or its owner is changed.

This feature is enabled by default when supported by the kernel.

Definition at line 351 of file fuse_common.h.

◆ FUSE_CAP_IOCTL_DIR

#define FUSE_CAP_IOCTL_DIR (1 << 11)

Indicates that the filesystem supports ioctl's on directories.

This feature is enabled by default when supported by the kernel.

Definition at line 222 of file fuse_common.h.

◆ FUSE_CAP_NO_OPEN_SUPPORT

#define FUSE_CAP_NO_OPEN_SUPPORT (1 << 17)

Indicates support for zero-message opens. If this flag is set in the capable field of the fuse_conn_info structure, then the filesystem may return ENOSYS from the open() handler to indicate success. Further attempts to open files will be handled in the kernel. (If this flag is not set, returning ENOSYS will be treated as an error and signaled to the caller).

Setting (or unsetting) this flag in the want field has no effect.

Definition at line 313 of file fuse_common.h.

◆ FUSE_CAP_NO_OPENDIR_SUPPORT

#define FUSE_CAP_NO_OPENDIR_SUPPORT (1 << 24)

Indicates support for zero-message opendirs. If this flag is set in the capable field of the fuse_conn_info structure, then the filesystem may return ENOSYS from the opendir() handler to indicate success. Further opendir and releasedir messages will be handled in the kernel. (If this flag is not set, returning ENOSYS will be treated as an error and signalled to the caller.)

Setting (or unsetting) this flag in the want field has no effect.

Definition at line 376 of file fuse_common.h.

◆ FUSE_CAP_PARALLEL_DIROPS

#define FUSE_CAP_PARALLEL_DIROPS (1 << 18)

Indicates support for parallel directory operations. If this flag is unset, the FUSE kernel module will ensure that lookup() and readdir() requests are never issued concurrently for the same directory.

This feature is enabled by default when supported by the kernel.

Definition at line 323 of file fuse_common.h.

◆ FUSE_CAP_POSIX_ACL

#define FUSE_CAP_POSIX_ACL (1 << 19)

Indicates support for POSIX ACLs.

If this feature is enabled, the kernel will cache and have responsibility for enforcing ACLs. ACL will be stored as xattrs and passed to userspace, which is responsible for updating the ACLs in the filesystem, keeping the file mode in sync with the ACL, and ensuring inheritance of default ACLs when new filesystem nodes are created. Note that this requires that the file system is able to parse and interpret the xattr representation of ACLs.

Enabling this feature implicitly turns on the default_permissions mount option (even if it was not passed to mount(2)).

This feature is disabled by default.

Definition at line 342 of file fuse_common.h.

◆ FUSE_CAP_POSIX_LOCKS

#define FUSE_CAP_POSIX_LOCKS (1 << 1)

Indicates that the filesystem supports "remote" locking.

This feature is enabled by default when supported by the kernel, and if getlk() and setlk() handlers are implemented.

Definition at line 153 of file fuse_common.h.

◆ FUSE_CAP_READDIRPLUS

#define FUSE_CAP_READDIRPLUS (1 << 13)

Indicates that the filesystem supports readdirplus.

This feature is enabled by default when supported by the kernel and if the filesystem implements a readdirplus() handler.

Definition at line 252 of file fuse_common.h.

◆ FUSE_CAP_READDIRPLUS_AUTO

#define FUSE_CAP_READDIRPLUS_AUTO (1 << 14)

Indicates that the filesystem supports adaptive readdirplus.

If FUSE_CAP_READDIRPLUS is not set, this flag has no effect.

If FUSE_CAP_READDIRPLUS is set and this flag is not set, the kernel will always issue readdirplus() requests to retrieve directory contents.

If FUSE_CAP_READDIRPLUS is set and this flag is set, the kernel will issue both readdir() and readdirplus() requests, depending on how much information is expected to be required.

As of Linux 4.20, the algorithm is as follows: when userspace starts to read directory entries, issue a READDIRPLUS request to the filesystem. If any entry attributes have been looked up by the time userspace requests the next batch of entries continue with READDIRPLUS, otherwise switch to plain READDIR. This will reasult in eg plain "ls" triggering READDIRPLUS first then READDIR after that because it doesn't do lookups. "ls -l" should result in all READDIRPLUS, except if dentries are already cached.

This feature is enabled by default when supported by the kernel and if the filesystem implements both a readdirplus() and a readdir() handler.

Definition at line 280 of file fuse_common.h.

◆ FUSE_CAP_SPLICE_MOVE

#define FUSE_CAP_SPLICE_MOVE (1 << 8)

Indicates that libfuse should try to move pages instead of copying when writing to / reading from the fuse device. This may improve performance.

This feature is disabled by default.

Definition at line 193 of file fuse_common.h.

◆ FUSE_CAP_SPLICE_READ

#define FUSE_CAP_SPLICE_READ (1 << 9)

Indicates that libfuse should try to use splice() when reading from the fuse device. This may improve performance.

This feature is enabled by default when supported by the kernel and if the filesystem implements a write_buf() handler.

Definition at line 202 of file fuse_common.h.

◆ FUSE_CAP_SPLICE_WRITE

#define FUSE_CAP_SPLICE_WRITE (1 << 7)

Indicates that libfuse should try to use splice() when writing to the fuse device. This may improve performance.

This feature is disabled by default.

Definition at line 185 of file fuse_common.h.

◆ FUSE_CAP_WRITEBACK_CACHE

#define FUSE_CAP_WRITEBACK_CACHE (1 << 16)

Indicates that writeback caching should be enabled. This means that individual write request may be buffered and merged in the kernel before they are send to the filesystem.

This feature is disabled by default.

Definition at line 300 of file fuse_common.h.

◆ FUSE_IOCTL_COMPAT

#define FUSE_IOCTL_COMPAT (1 << 0)

Ioctl flags

FUSE_IOCTL_COMPAT: 32bit compat ioctl on 64bit machine FUSE_IOCTL_UNRESTRICTED: not restricted to well-formed ioctls, retry allowed FUSE_IOCTL_RETRY: retry with new iovecs FUSE_IOCTL_DIR: is a directory

FUSE_IOCTL_MAX_IOV: maximum of in_iovecs + out_iovecs

Definition at line 411 of file fuse_common.h.

◆ FUSE_MAJOR_VERSION

#define FUSE_MAJOR_VERSION 3

Major version of FUSE library interface

Definition at line 23 of file fuse_common.h.

◆ FUSE_MINOR_VERSION

#define FUSE_MINOR_VERSION 11

Minor version of FUSE library interface

Definition at line 26 of file fuse_common.h.

Enumeration Type Documentation

◆ fuse_buf_copy_flags

enum fuse_buf_copy_flags

Buffer copy flags

Enumerator
FUSE_BUF_NO_SPLICE	Don't use splice(2) Always fall back to using read and write instead of splice(2) to copy data from one file descriptor to another. If this flag is not set, then only fall back if splice is unavailable.
FUSE_BUF_FORCE_SPLICE	Force splice Always use splice(2) to copy data from one file descriptor to another. If splice is not available, return -EINVAL.
FUSE_BUF_SPLICE_MOVE	Try to move data with splice. If splice is used, try to move pages from the source to the destination instead of copying. See documentation of SPLICE_F_MOVE in splice(2) man page.
FUSE_BUF_SPLICE_NONBLOCK	Don't block on the pipe when copying data with splice Makes the operations on the pipe non-blocking (if the pipe is full or empty). See SPLICE_F_NONBLOCK in the splice(2) man page.
FUSE_BUF_NO_SPLICE	Don't use splice(2) Always fall back to using read and write instead of splice(2) to copy data from one file descriptor to another. If this flag is not set, then only fall back if splice is unavailable.
FUSE_BUF_FORCE_SPLICE	Force splice Always use splice(2) to copy data from one file descriptor to another. If splice is not available, return -EINVAL.
FUSE_BUF_SPLICE_MOVE	Try to move data with splice. If splice is used, try to move pages from the source to the destination instead of copying. See documentation of SPLICE_F_MOVE in splice(2) man page.
FUSE_BUF_SPLICE_NONBLOCK	Don't block on the pipe when copying data with splice Makes the operations on the pipe non-blocking (if the pipe is full or empty). See SPLICE_F_NONBLOCK in the splice(2) man page.
FUSE_BUF_NO_SPLICE	Don't use splice(2) Always fall back to using read and write instead of splice(2) to copy data from one file descriptor to another. If this flag is not set, then only fall back if splice is unavailable.
FUSE_BUF_FORCE_SPLICE	Force splice Always use splice(2) to copy data from one file descriptor to another. If splice is not available, return -EINVAL.
FUSE_BUF_SPLICE_MOVE	Try to move data with splice. If splice is used, try to move pages from the source to the destination instead of copying. See documentation of SPLICE_F_MOVE in splice(2) man page.
FUSE_BUF_SPLICE_NONBLOCK	Don't block on the pipe when copying data with splice Makes the operations on the pipe non-blocking (if the pipe is full or empty). See SPLICE_F_NONBLOCK in the splice(2) man page.
FUSE_BUF_NO_SPLICE	Don't use splice(2) Always fall back to using read and write instead of splice(2) to copy data from one file descriptor to another. If this flag is not set, then only fall back if splice is unavailable.
FUSE_BUF_FORCE_SPLICE	Force splice Always use splice(2) to copy data from one file descriptor to another. If splice is not available, return -EINVAL.
FUSE_BUF_SPLICE_MOVE	Try to move data with splice. If splice is used, try to move pages from the source to the destination instead of copying. See documentation of SPLICE_F_MOVE in splice(2) man page.
FUSE_BUF_SPLICE_NONBLOCK	Don't block on the pipe when copying data with splice Makes the operations on the pipe non-blocking (if the pipe is full or empty). See SPLICE_F_NONBLOCK in the splice(2) man page.

Definition at line 661 of file fuse_common.h.

◆ fuse_buf_flags

enum fuse_buf_flags

Buffer flags

Enumerator
FUSE_BUF_IS_FD	Buffer contains a file descriptor If this flag is set, the .fd field is valid, otherwise the .mem fields is valid.
FUSE_BUF_FD_SEEK	Seek on the file descriptor If this flag is set then the .pos field is valid and is used to seek to the given offset before performing operation on file descriptor.
FUSE_BUF_FD_RETRY	Retry operation on file descriptor If this flag is set then retry operation on file descriptor until .size bytes have been copied or an error or EOF is detected.
FUSE_BUF_IS_FD	Buffer contains a file descriptor If this flag is set, the .fd field is valid, otherwise the .mem fields is valid.
FUSE_BUF_FD_SEEK	Seek on the file descriptor If this flag is set then the .pos field is valid and is used to seek to the given offset before performing operation on file descriptor.
FUSE_BUF_FD_RETRY	Retry operation on file descriptor If this flag is set then retry operation on file descriptor until .size bytes have been copied or an error or EOF is detected.
FUSE_BUF_IS_FD	Buffer contains a file descriptor If this flag is set, the .fd field is valid, otherwise the .mem fields is valid.
FUSE_BUF_FD_SEEK	Seek on the file descriptor If this flag is set then the .pos field is valid and is used to seek to the given offset before performing operation on file descriptor.
FUSE_BUF_FD_RETRY	Retry operation on file descriptor If this flag is set then retry operation on file descriptor until .size bytes have been copied or an error or EOF is detected.
FUSE_BUF_IS_FD	Buffer contains a file descriptor If this flag is set, the .fd field is valid, otherwise the .mem fields is valid.
FUSE_BUF_FD_SEEK	Seek on the file descriptor If this flag is set then the .pos field is valid and is used to seek to the given offset before performing operation on file descriptor.
FUSE_BUF_FD_RETRY	Retry operation on file descriptor If this flag is set then retry operation on file descriptor until .size bytes have been copied or an error or EOF is detected.

Definition at line 630 of file fuse_common.h.

Function Documentation

◆ fuse_apply_conn_info_opts()

void fuse_apply_conn_info_opts	(	struct fuse_conn_info_opts *	opts,
		struct fuse_conn_info *	conn
	)

This function applies the (parsed) parameters in opts to the conn pointer. It may modify the following fields: wants, max_write, max_readahead, congestion_threshold, max_background, time_gran. A field is only set (or unset) if the corresponding option has been explicitly set.

Definition at line 361 of file helper.c.

◆ fuse_buf_copy()

ssize_t fuse_buf_copy	(	struct fuse_bufvec *	dst,
		struct fuse_bufvec *	src,
		enum fuse_buf_copy_flags	flags
	)

Copy data from one buffer vector to another

Parameters

dst	destination buffer vector
src	source buffer vector
flags	flags controlling the copy

Returns: actual number of bytes copied or -errno on error

Definition at line 284 of file buffer.c.

◆ fuse_buf_size()

size_t fuse_buf_size ( const struct fuse_bufvec * bufv )

Get total size of data in a fuse buffer vector

Parameters

bufv	buffer vector

Returns: size of data

Definition at line 22 of file buffer.c.

◆ fuse_daemonize()

int fuse_daemonize ( int foreground )

Go into the background

Parameters

foreground if true, stay in the foreground

Returns: 0 on success, -1 on failure

Compatibility ABI symbol for systems that do not support version symboling

Definition at line 225 of file helper.c.

◆ fuse_parse_conn_info_opts()

struct fuse_conn_info_opts* fuse_parse_conn_info_opts ( struct fuse_args * args )

This function parses several command-line options that can be used to override elements of struct fuse_conn_info. The pointer returned by this function should be passed to the fuse_apply_conn_info_opts() method by the file system's init() handler.

Before using this function, think twice if you really want these parameters to be adjustable from the command line. In most cases, they should be determined by the file system internally.

The following options are recognized:

-o max_write=N sets conn->max_write -o max_readahead=N sets conn->max_readahead -o max_background=N sets conn->max_background -o congestion_threshold=N sets conn->congestion_threshold -o async_read sets FUSE_CAP_ASYNC_READ in conn->want -o sync_read unsets FUSE_CAP_ASYNC_READ in conn->want -o atomic_o_trunc sets FUSE_CAP_ATOMIC_O_TRUNC in conn->want -o no_remote_lock Equivalent to -o no_remote_flock,no_remote_posix_lock -o no_remote_flock Unsets FUSE_CAP_FLOCK_LOCKS in conn->want -o no_remote_posix_lock Unsets FUSE_CAP_POSIX_LOCKS in conn->want -o [no_]splice_write (un-)sets FUSE_CAP_SPLICE_WRITE in conn->want -o [no_]splice_move (un-)sets FUSE_CAP_SPLICE_MOVE in conn->want -o [no_]splice_read (un-)sets FUSE_CAP_SPLICE_READ in conn->want -o [no_]auto_inval_data (un-)sets FUSE_CAP_AUTO_INVAL_DATA in conn->want -o readdirplus=no unsets FUSE_CAP_READDIRPLUS in conn->want -o readdirplus=yes sets FUSE_CAP_READDIRPLUS and unsets FUSE_CAP_READDIRPLUS_AUTO in conn->want -o readdirplus=auto sets FUSE_CAP_READDIRPLUS and FUSE_CAP_READDIRPLUS_AUTO in conn->want -o [no_]async_dio (un-)sets FUSE_CAP_ASYNC_DIO in conn->want -o [no_]writeback_cache (un-)sets FUSE_CAP_WRITEBACK_CACHE in conn->want -o time_gran=N sets conn->time_gran

Known options will be removed from args, unknown options will be passed through unchanged.

Parameters

args	argument vector (input+output)

Returns: parsed options

Definition at line 408 of file helper.c.

◆ fuse_pkgversion()

const char* fuse_pkgversion ( void )

Get the full package version string of the library

Returns: the package version

Definition at line 5122 of file fuse.c.

◆ fuse_pollhandle_destroy()

void fuse_pollhandle_destroy ( struct fuse_pollhandle * ph )

Destroy poll handle

Parameters

ph	the poll handle

Definition at line 1809 of file fuse_lowlevel.c.

◆ fuse_remove_signal_handlers()

void fuse_remove_signal_handlers ( struct fuse_session * se )

Restore default signal handlers

Resets global session. After this fuse_set_signal_handlers() may be called again.

Parameters

se	the same session as given in fuse_set_signal_handlers()

◆ fuse_set_signal_handlers()

int fuse_set_signal_handlers ( struct fuse_session * se )

Exit session on HUP, TERM and INT signals and ignore PIPE signal

Stores session in a global variable. May only be called once per process until fuse_remove_signal_handlers() is called.

Once either of the POSIX signals arrives, the signal handler calls fuse_session_exit().

Parameters

se	the session to exit

Returns: 0 on success, -1 on failure

◆ fuse_version()

int fuse_version ( void )

Get the version of the library

Returns: the version

Definition at line 5117 of file fuse.c.

Data Structures

Macros

Enumerations

Functions

Macro Definition Documentation

◆ FUSE_CAP_ASYNC_DIO

◆ FUSE_CAP_ASYNC_READ

◆ FUSE_CAP_ATOMIC_O_TRUNC

◆ FUSE_CAP_AUTO_INVAL_DATA

◆ FUSE_CAP_CACHE_SYMLINKS

◆ FUSE_CAP_DONT_MASK

◆ FUSE_CAP_EXPLICIT_INVAL_DATA

◆ FUSE_CAP_EXPORT_SUPPORT

◆ FUSE_CAP_FLOCK_LOCKS

◆ FUSE_CAP_HANDLE_KILLPRIV

◆ FUSE_CAP_IOCTL_DIR

◆ FUSE_CAP_NO_OPEN_SUPPORT

◆ FUSE_CAP_NO_OPENDIR_SUPPORT

◆ FUSE_CAP_PARALLEL_DIROPS

◆ FUSE_CAP_POSIX_ACL

◆ FUSE_CAP_POSIX_LOCKS

◆ FUSE_CAP_READDIRPLUS

◆ FUSE_CAP_READDIRPLUS_AUTO

◆ FUSE_CAP_SPLICE_MOVE

◆ FUSE_CAP_SPLICE_READ

◆ FUSE_CAP_SPLICE_WRITE

◆ FUSE_CAP_WRITEBACK_CACHE

◆ FUSE_IOCTL_COMPAT

◆ FUSE_MAJOR_VERSION

◆ FUSE_MINOR_VERSION

Enumeration Type Documentation

◆ fuse_buf_copy_flags

◆ fuse_buf_flags

Function Documentation

◆ fuse_apply_conn_info_opts()

◆ fuse_buf_copy()

◆ fuse_buf_size()

◆ fuse_daemonize()

◆ fuse_parse_conn_info_opts()

◆ fuse_pkgversion()

◆ fuse_pollhandle_destroy()

◆ fuse_remove_signal_handlers()

◆ fuse_set_signal_handlers()

◆ fuse_version()